FillFoam Backfill for Bowed Foundation Wall Repair

Is there any maintenance needed? Now that the work is completed, it is the homeowner’s responsibility to caulk the seams of the sections that were repaired, or backfill against any exposed areas to contain the material, and prevent future sinking. Self-leveling cement caulk can be purchased at a home improvement

How do you fill the holes? After the concrete is raised with mudjacking material, a foam plug is inserted into the hole, and the hole is patched over with cement. The concrete is ready for use immediately.  It is however, recommended to allow the patch material to set-up before use,

What kind of material do you use to raise concrete? Mudjacking material is a sand based grout that will not lose its density. Combined with Portland cement this non-organic mixture is pumped under the slab of concrete.  Different from organic material, Raise Rite’s slurry will not decompose or breakdown. Polyurethane

How many holes will there be? On the day of your work, holes are strategically drilled every 3-5 feet in the settled area.  Less holes are typically drilled for polyurethane applications.  Holes are necessary to lift slabs, drilling holes cannot be avoided. As demonstrated in this image, polyurethane concrete raising