Fix Uneven Docks and Ramps Without Interrupting Shipments
When your loading dock or concrete ramp starts to sink, it creates major problems. Truck alignments go off, dock plates don’t seat right, and forklift transitions become dangerous. At RaiseRite, we lift and stabilize sunken docks and ramps using high-density polyurethane foam — fast, clean, and with minimal downtime.
Why Do Loading Docks and Ramps Sink?
Heavy vehicle traffic, water exposure, and freeze-thaw cycles take a toll on outdoor slabs. The soil beneath the dock or ramp begins to shift or wash out, causing the concrete to sink unevenly. When that happens, trucks can’t load properly, and your team risks injury or equipment damage.
If your dock or ramp is sinking, there’s a good chance other slabs nearby are moving too. We also level warehouse floors, factory slabs, interior floors, and municipal concrete. View all commercial services to learn more.
Why Wisconsin Trusts RaiseRite
- 50+ Years of Experience (Est. 1974)
- 100,000+ Projects Completed
- 5-Year Warranty
- Family-Owned & Operated (3 Generations)
- Fast, Same-Day Results
- Renewable Foam (40% recycled content)
- Virtual Estimates Available – Just snap, upload, and get a quote
We’re not a franchise. We’re your neighbors. And we care about doing the job right.
What Are the Signs You Need Dock or Ramp Leveling?
Unlevel docks and ramps disrupt workflow and increase liability. Watch for:
Gaps between dock plates and trailer beds
Cracked or separated joints near dock edges
Forklifts slamming or jarring during transitions
Water draining toward your building or pooling at ramps
Uneven ramps that cause tire dips or scraping
Our Fix: Quick, Clean Concrete Leveling with Foam
Step 1) Injection holes are strategically drilled around the areas where the concrete is sunken and requires lifting.
Step 2) Once everything is prepped, and the hose and material are in place, the polyurethane foam is injected through the holes. It expands to fill the space underneath the concrete slab, using the slab itself to drive the foam into the crevices, thereby lifting the concrete back to its original position.
Step 3) Once the concrete is stabilized and lifted to the proper position, the injection holes are filled with new cement, allowing you to use your surface immediately.
Polyurethane concrete raising uses a foam material that is injected under the slab. When the components of the material are mixed, a reaction causes the material to expand. This expanded foam fill any voids beneath the slab and raises the concrete. This material will never lose density, is permanent and weighs only about 2 pounds per cubic foot.
Frequently Asked Questions
Yes — we can work in phases or after hours to avoid interrupting your delivery schedule.
Yes. Leveling the concrete slabs helps restore proper alignment, so docks seal correctly against trailers.
Absolutely. Our foam is industrial-grade, built to withstand heavy vehicle loads and repeated impact.
Most ramps and docks are fully usable within hours of repair — no long cure times.
We inspect the entire area and can level surrounding concrete in the same visit if needed.
Yes — we also level interior floor slabs and warehouse concrete.
We include a 5-year commercial warranty on all dock and ramp leveling services.
Still have questions? Check out our full FAQ page for more answers.
We Keep It Simple
Uneven docks cost time and money. We help you avoid both with fast, accurate leveling backed by 50 years of experience. No delays. No mess. Just safe, level concrete that keeps your operation running.
What Our Customers Have to Say
Why Choose RaiseRite
Serving Wisconsin since 1974
Over 50 years of experience lifting and leveling concrete across Wisconsin and beyond.
100,000+ Jobs Completed
We’ve helped more families and businesses fix their concrete than anyone else in the state.
$20M+ Saved vs. Replacement
Our concrete lifting service has saved customers millions by avoiding tear-outs and full replacements.
5-Year Warranty
We stand behind every concrete leveling job with a real warranty — no fine print, just peace of mind.
Family-Owned & Operated
Three generations working together to deliver honest work and long-lasting results.
We Train the Industry
Contractors across the country come to us to learn — when you hire RaiseRite, you get the team that sets the standard.
We Manufacture the Tools
We build the same polyurethane foam and equipment used by top pros across the industry.
Residential, Commercial & Municipal Work
From homes to highways, we handle projects of all sizes — safely and professionally.
Proudly Based in Wisconsin
We’re a local team using American-made tools and doing the job right, every time.
